| 01254 813175

Falcon Evo Telescopic VFA

Falcon Evo Telescopic VFA


The Falcon Evo Telescopic VFA (Variable Forward Arm) is perfect for contractors and municipal environments, where the added benefits of a forward arm is required to improve visibility.

This flagship model in the VFA range provides an unrivalled 2.1m total travel including 1.8m forward reach, resulting in an optimum mid-mounted cutting head position.


Key Features:

6.5m reach

Over 2m traverse on variable forward arm

Axle bracket mounted only

125 l/min independent system

Product Specifications

Model Falcon Evo 6.5m T-VFA

Tractor Requirements

Minimum horse power 120hp
Minimum weight 4800kg / 10582Lbs

Base Unit Mounting Options

Front mount Not Available
Mid-mount Not Available
Rear mount Standard
Three point linkage (CAT II) Not Available
Axle bracket Standard

Overall machine parameters

Machine weight with head and oil 2270kg / 5005Lbs
Capacity of oil tank 250 Litres / 66USG
Weight of machine with oil but without head 1980kg / 4365Lbs


Cable control (CC) Standard
Low pressure hydraulics (LPH) Not Available
Electronic proportional control (EPP) Optional
Intelligent control system (ICS) Optional
Cable rotor reverse Optional
Electronic rotor reverse Optional

Hydraulic system

System capability 74 hp
Pump flow rate 125 Litres / 33usg
Pump type (Gear / Piston / Helical) Gear
Pump arrangement (Twin / In-line) Twin
Independent hydraulics Standard
Oil cooler Standard

Arm features and main frame

Forward arm 2112mm / 6'11"
Telescopic arm Standard
Telescopic arm stroke 900mm / 2'11"
Power slew Standard
Power slew angle 94°
Gravity breakout protection Not Available
Hydraulic breakout protection Standard
Arm float - Manual operation Standard
Arm float - Electronic operation Standard
Head float - Manual operation Standard
Head float - Electronic operation Standard
Left hand cutting Optional
Right hand cutting Optional
Left and right hand cutting Not Available

Arm attachments available

Variable track bracket (VTB) Not Available
Sheartrim cutter bar Optional
Pro-Saw Optional
Ditch cleaner Optional
Rotary head Optional


Road lights Standard
Debris blower Optional
Warning Arrow (Magnetic / Fixed) Optional
Cab guard kit Standard

Cutting Heads

1.2m Pro-Cut with 115mm Roller Optional
1.2m Pro-Cut with 150mm Roller Optional
1.5m Pro-Cut with 115mm Roller Optional
1.5m Pro-Cut with 150mm Roller Optional
1.2m Pro-Cut ISMP with 115mm Roller Optional
1.2m Pro-Cut ISMP with 150mm Roller Optional
2m HD head Optional


See the table below to see which flail heads are available for the different cutting heads listed above.

 BBMP44HS60Pro FlailT40T60True CutBushmaster
1.2m Pro-Cut with 115mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
1.2m Pro-Cut with 150mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
1.5m Pro-Cut with 115mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
1.5m Pro-Cut with 150mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
1.2m Pro-Cut ISMP with 115mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
1.2m Pro-Cut ISMP with 150mm rollerOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptional
2m HD headOptionalStandardNot AvailableNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Working Reach Dimensions

Head used to calculations: 1.2 Pro Cut


Side Reach - T-VFA 6.5m (21'4)



Forward Reach - T-VFA 6.5m (21'4)